KO Propo RSx3-One10 Ver.D Lite Low Profile High Speed Servo W/Servo Selector (High Voltage)

The KO Propo RSx3-One10 Ver.D Lite Low Profile High Speed Servo with Servo Selector was designed specifically for 2WD drift cars to increase stability while drifting. A mild parameter setting minimizes servo vibration when using a gyro with 2WD drift cars. The plastic topped case is 5.8g lighter than previous models. This servo comes with five types of data to match various road conditions pre-installed for convenience.

The appearance and tightening black cable has the softness optimum for handling while securing the necessary current capacity. 

HCS (High Speed Communication System) is the new high speed communication system between the receiver to the servo. The HCS mode shortens communication time of the signal. HCS compatible servos can change mode automatically by signalling from the receiver, allowing HCS compatible servos to be used with all receivers.

Installed preset setting of five models. You can change each model to fit your car or track easily. It is useful for beginner to expert drivers, providing a setting for many situations and tracks.

• Model 1  Easiest: can most easily operate.
• Model 2  Easy: can easily operate
• Model 3  Standard Setting (Selected)
• Model 4  Fast: Quick – Sensitive operation.
• Model 5  Expert: Fastest – recommend to expert drivers.

7.4V Torque: 8.2Kg-cm  

7.4V Speed: 0.08 sec/60° 

6.0V Torque: 7.0Kg-cm 

6.0V Speed: 0.09 sec/60° 

Dimensions: 40.5×26.5×21mm (Low Profile)

Weight: 42.10g 

Operating voltage: 6.0~7.4V (Lipo,Life,Ni-MH) 

Gears: Hard alumite aluminum gear 

Motor: Core-less motor 

Bearings: Dual bearings 

Plastic Top Case: Yes 

Aluminum Middle Case: Yes 

Gold Plated Connector: Yes 

Black Cable: Yes 

HCS Compatible: Yes 

• (1) Servo
• (1) Screw for horn
• (4) Grommets